Profileen ® storage/loft tanks : Polyethylen of high density is authorized for the storage of food and drinking water. Our storage tanks are used wherever the drinking water supply must be ensured with a relatively low supply pressure but high buildings must be supplied with water. As a rule, the water tanks have a volume of 8 m³ to 15 m³. Such supply systems have proved themselves especially in fast-developing nations like Malaysia or India. The low weight of the tanks makes a transport with helicopters on the roofs of the buildings where the prefabricated systems must only be attached by fitters possible.     Profileen ® buffer and measuring tanks : As well in highly developed industrial countries there are often problem with the water supply of the areas which are far away and only sparsely populated. Here the pressure water pipe leads often to so-called buffer or storage tanks and from here a decentralized supply of the attached consumer is carried out.     At the same time the tanks serve for the connection of the measuring and control technology/engineering as well as for the pumps for passing on the drinking water. For the inspection the tanks are executed accessible. Tanks of this construction are used for example in Switzerland. Due to the low weight the transport can be made by helicopter also to areas which are otherwise only accessible with difficulties.